H-GLIDE
Low-Friction Bearing Pads for High-Performance Structures
H-GLIDE
H-GLIDE is an alternative bearing pad component – typically integrated within our Type ‘D’ Steel Bearing (HLD) range – engineered to deliver ultra-low friction and high load capacity for demanding structural applications. These bearing pads are designed for extreme load cases sites where controlled movement, high load capacity, and minimal maintenance are critical. This material is typically used in mining site applications due to its thermal and chemical resistant properties.
Key Features
- Exceptional Low Friction:
Coefficient of friction as low as 0.01–0.03, enabling smooth structural movement under load. Stick-slip is virtually zero. - High Load Capacity:
Engineered to withstand high vertical and horizontal loads with minimal deflection and wear rates. - Multi-Directional Movement:
Accommodates thermal expansion, seismic activity, and long-term structural movement in multiple directions. - Maintenance-Free Operation:
Self-lubricating sliding interface ensures long-term reliability with zero maintenance requirements.
Why Choose H-GLIDE?
All H-GLIDE bearing pads comply with relevant Australian and international standards including AS 5100, AASHTO, and EN 1337.
The main properties of H-Glide FC are summarised in the table below.
| Property | Unit | Value |
|---|---|---|
| compressive strength | (MPa) | 350 |
| shear strength | (MPa) | 105 |
| stiffness under compression | (MPa) | 1600 |
| density | (10³ kg/m³) | 1.35 |
| water absorption, submerged | (%) (10⁻) | 0.3 |
| coefficient of thermal expansion | (10⁻⁶/°C) | 50 |
| chemical resistance | (-) | good |
| colour | (-) | orange-pink |
| maximum temperature | (°C) | 150 |
| minimum temperature | (°C) | <-200 |
| advised maximum working temperature | (°C) | 100 |
| typical friction value, dry | (-) | 0.05 – 0.10 |
| general wear resistance | (-) | excellent |
| resistance against abrasive wear | (-) | excellent |
Our Services
Design
We serve as technical liaisons with consulting engineers and builders at the design stage of a project. Provision of detailed specifications, calculations and feedback on drawings for project specific applications.
Manufacturing
All products in the Hercules™ range are manufactured and tested in compliance with the relevant standards: AS5100.4:2017, BS5400, AASTHO and MS ISO 9001.
Technical Support
We provide detailed installation guidance that is specific to each project and site conditions. Remote and/or on-site assistance provided by via comprehensive data sheets and trained personnel where appropriate.
Custom Solutions
Our capabilities include providing tailored solutions to challenging engineering scenarios, where conventional methods of design, manufacturing and installation may not be suitable.
Design
We serve as technical liaisons with consulting engineers and builders at the design stage of a project. Provision of detailed specifications, calculations and feedback on drawings for project specific applications.
Manufacturing
All products in the Hercules™ range are manufactured and tested in compliance with the relevant standards: AS5100.4:2017, BS5400, AASTHO and MS ISO 9001.
Technical Support
We provide detailed installation guidance that is specific to each project and site conditions. Remote and/or on-site assistance provided by via comprehensive data sheets and trained personnel where appropriate.
Custom Solutions
Our capabilities include providing tailored solutions to challenging engineering scenarios, where conventional methods of design, manufacturing and installation may not be suitable.